Get The Highest Performance Dynamic Fatigue Torsion Test Machines

560 Series Torsion Test Machines

The 560 series electrodynamic torsion test machines are designed for static, dynamic and fatigue testing applications up to 200 Nm (1770 in-lb). Available in horizontal and vertical configurations. The 560 Series is capable of more sophisticated dynamic fatigue applications for users with fatigue-life testing requirements. Each torsion testing machine configuration includes a test controller, easy setup test software, test table with rotary actuator or motor, power source, torsion test fixtures, and torque and angular position sensors.

The system is capable of static constant angular speed or torsion load rate tests with a cyclic mode for repetitive sinusoidal or triangular waveforms that can cycle between angular positions or torque load limits. Tests last millions of cycles, or until sample failure. 

*Higher speed options available upon request.
**Standard test space is 400 mm (16 in), however, test space is easily customizable and can be extended to meet your test requirements.

Top Features of the 560 Series

• Includes anti-thrust (axial load) bearings.
• Electrodynamic motor with position encoder.
• Controller for angle and torque measurement and control
• Fatigue rated torque cell and angular position measuring digital encoder.
• Test software to setup, run, save data, analysis and report generation.
• Wide range of compatible optional accessories including chucks, engineered fixtures, environmental chambers, etc.
• Meets or exceeds national and international accuracy standards for materials testing systems.

Step 1: Select Your Frame

560T2 Family Torsion Test Machines

Type: Electrodynamic Direct Drive
Capacity: 1 to 20 Nm (9 to 177 in-lb)

The 160T2 frame is ideal for mid capacity applications. Both horizontal and vertical configurations are available.

560T3 Family Torsion Test Machines

Type: Electrodynamic Direct Drive
Capacity: 30 to 100 Nm (270 to 900 in-lb)

The 160T3 design features a torsionally stiff reaction frame with a motor mounted rigidly to a baseplate. The baseplate includes sliding bearings and a second reaction plate with a torque cell mounted to it. The motor is controlled by a Newton servocontroller configured with a torsion software package, power pack, and angular encoder for position feedback. The 160T3 is used to test a variety of materials and components. The test frame is compact and applies where space is limited. The test frame can be made to match extended sample length requirements. Both horizontal and vertical configurations are available.

560T5 Family Torsion Test Machines

Type: Electrodynamic Direct Drive
Capacity: 110 to 200 Nm (970 to 1770 in-lb)

The 560T5 frame is ideal for spinal implant testing.

Step 2: Select Your Controller Software

Choose From 190+ Pre-configured Software Solutions

Pre-configured solutions meet customer specifications and budget for a wide range of test applications. Industry standard-specific software modules, enhanced features and custom calculations are just a few of the options to choose from with Newton.

Step 3: Select Your Accessories

Choose From 1,000's of Accessories

Choose from a wide variety of test accessories for a wide variety of purposes. These accessories include grips, environmental chambers, transducers, and sample preparation items. With these accessories, you can have confidence that your specimens will be tested consistently, correctly, and will yield ideal results.

Step 4: Contact Us

Ready to configure your test machine?

Contact us to confirm your configuration, request prices, and place your order.