LTP-303 프로그래밍 압력 컨트롤러는 원격으로 압력 조정이 필요한 소형 프레스, 금형 또는 기타 장치를위한 소형 턴키 솔루션입니다. Lambient Technologies LTP-250 Bench Top MicroPress 또는 사용자의 기존 프레스와 함께 사용할 수 있습니다. 이 솔루션은 라미네이트 테스트 및 개발과 같이 제어된 압력 하에서 재료를 테스트하는 모든 R&D 애플리케이션에 이상적입니다. 또한 가압 누출 테스트 애플리케이션(pressurized leak testing application)에도 이상적입니다.
DESCRIPTION
The LTP-303 Programmable Pressure ControllerTM is a compact, turn-key solution for small presses, molds or other devices that require remotely adjustable pressure. The LTP-303 communicates through an RS-485 interface to a computer running the Windows operating system and uses 15 – 24 VDC power. Included software allows the user to set up to four pressure levels that are automatically set at specified times.
Maximum input pressure is 120 psi. Output pressure may be adjusted from 0 psi to 100 psi as desired.
The LTP-303 is supplied with standard push-to-connect fittings for 10 mm OD air tubing, an RS-485 to USB adapter with null modem cable, and a 15 VDC power supply.
Specifications
Dimensions (L x W x H) : 17.26 cm x 12.7 cm x 19.0 cm (6.75” x 5.0” x 7.5”)
Standard fittings : Push-to-connect for 10 mm OD air tubing for input/output
Recommended tubing : Firm or hard tubing, A88-A95 Durometer, nylon or polyurethane
Maximum input pressure : 120 psi
Pressure output range : 0 – 100 psi, programmable
Power : 15 - 24 VDC, 50 mA
Communications : RS-485
Included with LTP-303 : RS-485 to USB adapter, 15 VDC power supply, software
The LTP-303 Programmable Pressure Controller is a compact, turn-key solution for small presses, molds or other devices that require remotely adjustable pressure. It can be used with the Lambient Technologies LTP-250 Bench Top MicroPress, or with a user’s existing press. This solution is ideal for any R&D application involving testing a material under controlled pressure, such as the testing and development of laminates. It is also ideal for pressurized leak testing applications.
