메뉴 건너뛰기

Thermal Analyzers

ARC, Dielectric Cure Monitor (DEA), Plastic identification, Proximate analyzer, TGA

LT-440 Dielectric Channel 유전체 열경화거동 모니터

LT-440 Dielectric Channel 유전체 열경화거동 모니터

LT-440 Dielectric Channel은 R&D, 품질 관리 / 품질 보증 시 경화거동 모니터링을 위해 고안된 저렴하고 컴팩트한  모델이며, 열경화성 재료 (수지 및 복합재료, 페인트, 코팅)의 제조 시 겔타임과 경화완료 시간을 측정하는 데 사용됩니다. LT-440은 모든 Lambient Technologies사의 dielectric/conductivity 센서와 대부분의 다른 dielectric sensor 또는 conductivity sensor의 사용이 가능합니다.

LT-440 Dielectric Channel은 10 Hz, 100 Hz, 1 kHz 및 10 kHz 여기 주파수 (excitation frequency)를 사용하며, 주파수 옵션으로 1 Hz – 10 kHz이 가능합니다. Dielectric Channel의 인터페이스는 Lambient Technologies사에서 제공하는 일회성 혹은 재사용 dielectric/conductivity  센서 또는 사용자 센서를 수용하므로 모든 프로세스 환경에서 유전체의 경화거동을 모니터링하는 시스템입니다. 본 제품을 이용한 경화거동분석에는 Varicon Disposable Variable Conductivity Sensor와 CERAMICOMB-1”  Reusable Dielectric Sensor가 사용됩니다. 

 

                         Cure state of Dielectric Channle with CureView software

표준 RS-232 serial port 또는 옵션의 RS-485 serial port를 통해 어떠한 control network와도 LT-440의 측정 인터페이스가 가능합니다. 모든 LT440은 하나의 유전체 센서 (dielectric sensor)와 하나의 열전대 (thermocouple)를 지원하지만 싱글 RS-485 라인에 최대 127개의 개별적인  Dielectric Channels을 연결할 수 있습니다. 이러한 low-cost 유연성은 복잡한 케이블링 없이 대형 복합재료 제품의 어느 국소 부분에서도 재료 상태에 대한 동시에  다채널로 경화 모니터링 (simultaneous, multichannel cure monitoring)이 가능합니다.  

Lambient Technologies는 완전한 유전체 경화 모니터링 시스템 (dielectric cure monitoring system)을 위해 LT-440을 제어 할 수있는 CureView 소프트웨어 옵션을 제공합니다. CureView를 사용하여 경화 거동 모니터링 parameter를 정의하고, 데이터를 수집, 저장하고, 데이터를 호출 및 분석하고, 결과를 플로팅, 인쇄할 수 있습니다. LT-440에 의한 경화 상태 정보 또한 사용자의 자체 공정 제어 소프트웨어에 쉽게 통합될 수 있습니다.

 


Specifications

 

Measurement:

  • Available standard frequencies (Hz): 10 100 1K 10K
  • Extended frequency option (Hz): 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1.0K 2.0K 3.0K 4.0K 5.0K 6.0K 7.0K 8.0K 9.0K 10K
  • Measurement speed: 1.5 sec/measurement for 10 Hz or greater 6 sec/measurement for 1 Hz
  • Excitation amplitude: Sine wave, 2.0 V nominal (4.0 V peak-to-peak)
  • Inputs: 1 dielectric sensor, 1 thermocouple, 2 opto-isolated digital triggers (0-5 V)
  • Outputs: 2 isolated relay contacts (0.5 A max capacity each relay)
  • Dielectric sensor type: Interdigitated, parallel plate or single electrode
  • Thermocouple type: J standard, K by special order
  • Communications: USB (RS-232 with adapter standard), RS-485 optional
  • Multi-channel capability: Up to 127 LT-440 units on a single RS-485 line

 

Software:

  • Optional—CureView site license: Complete data acquisition package with full analysis capability and features, including Critical Point Analysis.

 

Physical:

  • Dimensions: 8.5” width x 4.0” height x 12.5 depth” (21.6 cm width x 10.1 cm height x 31.8 cm depth)
  • Weight: 4 lbs (1.8 Kg)
  • Electrical Power: 100 VAC – 240 VAC, 50/60 Hz autoswitching universal input, 1 A max

 

LT-440 Dielectric Channel 유전체 열경화거동 모니터

The LT-440 Dielectric Channel is a cost effective, compact instrument designed for cure monitoring in R&D, Quality Control/Quality Assurance and manufacture of thermoset materials—resins, composites, paints and coatings. The LT-440 will accept all Lambient Technologies dielectric/conductivity sensors, and most other dielectric or conductivity sensors. The standard LT-440 Dielectric Channel has 10 Hz, 100 Hz, 1 kHz and 10 kHz excitation frequencies. An extended frequency option expands the range to 1 Hz – 10 kHz with additional frequencies within each decade. When used with either disposable or reusable dielectric/conductivity sensors, also available from Lambient Technologies, or the user’s own sensors, the LT-440 Dielectric Channel Interface becomes a complete system for dielectric cure monitoring in all processing environments.

Measurements from the LT-440 may be interfaced to any control network through its standard RS-232 serial port or optional RS-485 serial port. Each LT439 supports one dielectric sensor and one thermocouple but up to 127 individual Dielectric Channels may be connected on a single RS-485 line. This low-cost flexibility eliminates complex cabling and allows simultaneous, multichannel cure monitoring of material state at any point in a large part.


Lambient Technologies provides optional CureView software to control the LT-440 for a complete dielectric cure monitoring system. With CureView the user can define cure monitoring parameters, acquire and store data, recall and analyze data, and plot and print results. Information about cure state from the LT-440 also can be easily incorporated in the user’s own process control software.


 

share