메뉴 건너뛰기

Thermal Analyzers

ARC, Dielectric Cure Monitor (DEA), Plastic identification, Proximate analyzer, TGA

LTP-350 Thermo-pneumatic MicroPress

LTP-350 MicroPress는 SMC, BMC, 에폭시, 폴리 에스테르, 폴리스티렌, 폴리 우레탄, 실리콘, 라미네이트 및 다양한 폴리머 재료의 열경화용으로 설계된 소형 thermal pneumatic press입니다.

  • 온도범위: Ambient to 350 °C 
  • 적용 하중: 최대 909 Kg 
  • 상하 각각의 플래이트는 독립적인 등온 온도 컨트롤이 가능합니다.
  • 램프 및 홀드 모드.
  • 컨트롤러가 분리되어 있어 서비스가 간단합니다.

 

Providing a portable, easily operated platform to reproduce the time-temperature-pressure processing profiles of most polymers, the LTP-350 MicroPress has independent temperature control of both upper and lower platens and can operate in either isothermal or ramp-and-hold modes.


The heating temperature range is ambient to 350 Degrees C (660 Degrees F), and maximum applied force is 2000 pounds (909 Kg). Platen area is 3.0” x 3.0” (75 cm x 75 cm), and the LTP-350 MicroPress dimensions are shown in the figure below.
The LTP-350 MicroPress can be controlled manually or with the Lambient Technologies CureView software. When used with any of the Lambient Technologies dielectric sensors, the LTP-350 MicroPress becomes a complete testing station for dielectric cure studies.
 

Specification

Cylinder diameter:
5” (125 cm)
Maximum input air pressure:
120 psi
Maximum applied force:
2000 pounds (909 Kg)
Pneumatic connection:
Nylon or polyurethane tubing 10 mm O.D., 1.5 mm wall thickness, rated for 8.25 bar (120 psi)
Stroke (max. platen separation) :
4.5” (11.4 cm) without CeramicombTM sensor plate, approximately 3.25 “ (8.9 cm) with sensor plate
Platen dimensions:
3” x 3” (75 cm x 75 cm)
Press dimensions (H x W x D):
28.3” x 17.4” x 19.0 “ (71.9 cm x 44.2 cm x 48.3 cm)
Press weight:
80 lbs. (36 Kg)
Water connection:
None
Cooling:
Ambient cooling or optional cooling plate with circulating water
Working temperature:
ambient to 350 °C (660 °F)
Thermocouples:
Type J, one in each platen
Total heater power:
450 W (225 W/platen)
Press voltage:
120 or 240 VAC, 50-60 Hz (specify mains voltage when ordering)
Press current:
4.1 A at 120 VAC, 2.0 at 220 VAC
Controller voltage:
120 or 240 VAC, 50-60 Hz (specify mains voltage when ordering)
Controller communications:
RS-485, USB with adapter
LTP-350 Thermo-pneumatic MicroPress
The LTP-350 MicroPress is a miniature thermal pneumatic press designed for the curing of SMC, BMC, epoxies, polyesters, polystyrenes, polyurethanes, silicones, laminates and other polymeric materials.

 

share