메뉴 건너뛰기

Rheometer

Viscometer, In-line Viscometer, HT/HP Rheometer, Consistometer, Interfacial Tension Tester

Process Viscometer QVis 01/o

Accurate and versatile

QVis 점도계의 핵심은 견고하고 뛰어난 감도의 oscillating quartz 입니다. 마모없는 wear-free crystal로 구성되어 있어서, 액체 및 유체의 동적 점도 (dynamic viscosity)를 측정할 수 있습니다. 난류를 갖는 유체라도 유량 조건으로 부터 완전히 독립적인 측정이 가능합니다. 

QVis의 작동 원리: 시료 (테스트유체)에 quartz sensor를 담그면 quartz의 진동 거동이 변합니다. 진동 (oscillation)에 대한 각각의 영향은 점도에 따라 특이한 ​​특성을 가지고 있으며 점도를 결정하는데, flucon 점도계에 의해 완벽하게 분석됩니다. 특허 받고 검증된 신뢰할 수있는 측정 방법으로 QVis는 점도 측정 및 제어에 대한 많은 새로운 가능성을 열어주는 독창적인 기기입니다.

 

Key features

  • Available for both inline/process and laboratory applications
  • Measurement of the dynamic viscosity and temperature
  • Simultaneous display of the kinematic viscosity
  • Determination of the viscosity independent of the direction of flow
  • High shear-rates without adverse effects on the test fluid
  • Large measuring range (1 to 10.000 mPas)
  • Only small samples required for measurements (approx. 35 ml)
  • Short set-up and measuring times
  • Easy to handle and to clean
  • Robust quartz sensor without any moving parts
  • Standard digital interface (RS-232) for optional connection to your WINDOWS PC

 

Fields of application

The QVis viscometer can be run either in stand-alone mode or - with the included powerful software - on any WINDOWS computer via RS-232/USB. By means of its analog output (process version) it can also be used to surveil certain viscosity control elements, e.g. for diluent admixing.

 

Would you like to analyze and control the viscosity of your fluids continuously during your process? The inline viscosimeter QVis 01/o  automates your viscosity monitoring and generates measuring results which are reproducible and documentable. Banish flow cups and  keep track of your fluid viscosity at all times!

 

Application

Since measurement of the dynamic viscosity with QVis is completely independent of the direction of flow, the mounting of the QVis 01/o sensor can be realized in any form of pipe, regardless of the flow conditions in it. QVis can be operated in stand-alone mode or it can be connected to your computer; a comfortable pc software is included in the delivery and allows you to automate measuring procedures and to further process the obtained data.

 

Composition

The inline viscosimeter QVis 01/o consists of only two components: a probe and a compact electronic unit which are connected through a flexible cable. The robust plastic housing includes an electronic control and evaluation system and can be mounted directly on a wall or into your control cabinet.

The measuring head is equipped with a 1″ screw connection and allows maximum mounting flexibility. Depending on your requirements further types (e.g. clamping fastened sensors with screw-cap or sensors with special thread or flange connection) are available upon request. We offer different sensors for different applications: A distinction is made between sensors for electrically conductive and non-conductive fluids as well as for sensors suited for high temperature or high pressure applications. No matter your application, we have the right sensor for you and will be happy to help you find it.

 

Blockschaltbild für das Prozessviskosimeter QVis

 

 

Technical data

Power supply 110-240 V, 50/60 Hz
Energy consumption Less than 10 W
Viscosity range 1 to 10.000 mPas
Repeatability

Deviation ± 1% for η above 10 mPas

Deviation ± 0,1 mPas for η ≤ 10 mPas

Calibration reference oil calibration
Response time approx. 15 s
Frequency approx. 56 kHz
Shear rate approx. 3,5 *105 s-1
Sensor consumption Less than 100 mW
Temperature range sensor -20°C to 120°C (optionally up to 300°C)
Pressure range sensor 25 bar
Temperature measurement PT100 (4-wire technology), +/- 0,1°C
Data communication (computer) RS-232 interface
Dimensions electronic unit (LxWxH) 330 x 290 x 145 mm
Dimensions sensor

immersion depth 50mm,

custom-made sizes available upon request

For the application in explosive hazardous areas, please refer to the explosive-proof process viscosimeter.

 

New possiblities. With Qvis.

The QVis 01/o is more than just a sensor for the determination of viscosity. It's an intelligent measuring system that facilitates process management and optimizes customized quality control.

Process Viscometer QVis 01/o


 

flucon fluid control GmbH, Germany
share
인라인점도계 Q-Vis Online Viscometer Accurate and versatile The core of the Q-Vis viscometer is an oscillating quartz which is robust and
댓글 0
155
레오미터 M9200 HPHT Foam Rheometer The Grace Instrument M9200 HPHT Foam Rheometer is designed to simulate foam fracturing and acidizin
댓글 0
24,924
« 1 2 3 »
« 1 / 3 »