5% - 20% DTBP — a Standard Sample
INTRODUCTION
|
Data from 20% DTBP in toluene is presented in TAN 10.
DTBP in toluene is a good example to generally investigate the overall performance of the RSD. The Heat of Reaction of DTBP is approximately 175 kJ/mole or 1200J/g. Therefore 6 g of a 5%, 10%, 145% and 20% solution would decompose to give approximately 350 Joules, 700 Joules, 1050 Joules 1400 Joules respectively.
The ability of the RSD to test several samples simultaneously makes these good samples to test in a demonstration situation. This we have done on several occasions and at the same time run a fifth sample, pure toluene as a reference
|
Method 및 측정결과, 평가/해석에 관한 추가자료는 다운로드 하셔서 열람하세요.
Reference:
Technical Application Note 11, Thermal Hazard Technology, UK