PRODUCT INFORMATION Model# G11 Force Three models rated 5 kN (1,125 lbf); 20 kN (4,500 lbf); 50 kN (11,250 lbf) Spring or Scissor action grips are ideal for soft materials and elastomers such as foam or dogbone flat samples of flexible plastics and elastomers that experience a large reduction in cross-section area under load. They provide positive non-slip gripping action and are quick and simple to use. The fast action lever approach makes sample insertion easy and the spring pressures of the jaws give a positive non-slip action gripping force. The force of the grip is proportional to the tensile strength using the self clamping principle. Also the lateral movement ensures good sample alignment during the test. Note: Optional adapters or mechanical connections available for all test machines. Product Literature G11 Spring Loaded Scissor Grips

PRODUCT INFORMATION Model# G7 Force 1 kN (225 lbf); 5 kN (1,125 lbf); 10 kN (2,250 lbf) Thickness 0 to 7 mm (0.28 in) or 8 mm (0.31 in) Temperature 0 to +70 deg C (32 to 158 deg F) Eccentric roller grips feature a self-tightening clamp action ideal for flat samples of thin sheets, films, flexible plastics and elastomers that experience a large reduction in cross-section area under load. They provide positive non-slip gripping action and are quick and simple to use. The single lever, fast action makes sample insertion easy and the spring pressures of the roller bracket giving a positive non-slip action gripping force, sufficient to hold the material until a load is applied. The roller while under test prevents the specimen from creeping out of the grip as the load increases. See pdf for detailed specifications. Note: Optional adapters or mechanical connections available for all test machines Product Literature G7 Series Tensile Eccentric Roller Grips

G766 Eccentric Roller (Dual) 5 kN (1125 lbf) 15 or 40 mm (0.6 or 1.6 in)

G820 12 kN (2700 lbf) 11 mm (0.44 in) Bollard Pneumatic

G806 50 kN (11250 lbf) 100 mm (4 in) Bollard Mechanical

G375P 1.3 kN (290 lbf) 20 mm (0.8 in) Bollard Pneumatic

G375 5 kN (1125 lbf) 20 mm (0.8 in) Bollard Mechanical

G170H 100 to 250 kN (22 to 55 kip) 20 mm (0.8 in) Capstan Snubbing Hydraulic

PRODUCT INFORMATION Model# G255SK Force 10 kN (2,250 lbf) Thickness 4 mm (0.16 in) Sample Width 25 mm (1 in) Capstan grips are designed for tensile tests on samples that are round cross section such as wire, cord, twine, yarn, thread, medical sutures, tubes and rope. Rated to 10 kN (2,250 lbf) Maximum sample Dia. 4 mm (0.157 in) 26mm (1.02 in) Dia. Capstan Serrated Jaws 15.9 mm (0.625 in) Dia. female cup adapter with a hole for a 8 mm dia. cross pin Note: Optional adapters or mechanical connections available for all test machines.